Welcome to the website of Ezhou Anjikang Technology Co., Ltd.!
Other additives

Solvent based silicone defoamer anjeka 5680a

introduce—— Overview of anjeka-5680a anjeka-5680a is suitable for high solid, high film thickness epoxy floor coatings and screen ink, UV curable coating ink anti foam, defoamer. Product information

  • Other additives

Details/ Content details

Mobile phone scan

Overview of solvent-based silicone defoamer Anjeka 5680A

Anjeka 5680A is suitable for high solids, high film thickness epoxy floor coatings and screen inks, UV light curing coatings and inks, antifoaming and defoaming agents. 

product information

Chemical composition: polysiloxane compound containing hydrophobic particles .

The data given on this data page are only typical values, not technical indicators of the product.

Appearance: translucent liquid

Specific gravity : 0.96-1.0

Effective substance content: aaaa

Refractive index: 1.399-1.409 (25℃ )

Defoamer

Storage and transportation of solvent-based silicone defoamers

When the temperature is lower than 5 °C  , delamination may occur. Heat to 20 °C  and mix well before use .

pay attention

The full effect of the defoamer can only be obtained 24 hours after being put into the system .
Application information

Industrial Coatings

Features and advantages of solvent-based silicone defoamer:

Anjeka5680A is an excellent suds suppressor, defoamer, bubbles and high solids solvent-free epoxy floor coating in the manufacture and construction produced, have a good effect of eliminating and inhibiting high viscosity high The film thickness, especially the solvent-free high film thickness epoxy floor coating, has a good effect of suppressing bubbles .

Application field

Epoxy floor coatings screen inks UV inks .

Recommended dosage

0.01-1.0% The amount of additives (purchase form) is based on the total formula.

The above data is empirical dosage, and the best dosage needs to be determined through a series of experiments.

 Wuhan Defoamer

Joining method and processing guidance

In order to obtain the best performance, it is better to add foam suppression effect a before grinding or stirring. It can also be added afterwards, but it must be stirred evenly . 

package

—25kg inner coated iron drum

—180kg ring plastic drum


Scan it

See more exciting

support hotline

0711-5117111