Overview of water-soluble defoamer Anjeka 5062

Anjeka5062 is a deaerator for water-based coatings. It can be used in varnish and color paint formulations, and has good compatibility with water dilutable systems such as pure acrylic emulsion system, styrene acrylic emulsion system, PU dispersion, mixed system, and resin.

product information

Chemical composition: polyether siloxane emulsion containing hydrophobic particles .

The data given on this data page are only typical values, not technical indicators of the product.

Appearance: translucent liquid

Specific gravity:  0.96-1.0

Effective substance content: aaaa

When the temperature of the water-soluble defoamer is lower than 5 °C  , delamination may occur. Heat to 20 °C  and mix well before use .

pay attention

The full effect of the defoamer can only be obtained 24 hours after being put into the system .
Application information

Industrial Coatings

Features and advantages of water-soluble defoamer:

Anjeka5062 is used in water-based systems. It has excellent anti-foaming and defoaming properties and solves the risk of shrinkage. It is especially suitable for water-based epoxy floors.

Application field

Water-based industrial coatings, screen inks, UV inks.

Recommended dosage

0.1-1.0% The amount of additives (purchase form) is based on the total formula.

The above data is empirical dosage, and the optimal dosage of a needs to be determined through a series of experiments.

Joining method and processing guidance

In order to obtain a good performance, it is better to add foam suppressing effect a before grinding or stirring. It can also be added afterwards, but it must be stirred evenly. 

package

—25kg inner coated iron drum

— 180 kg ring plastic bucket