Waterborne acrylic leveling agent Anjeka 7361 Overview
Anjeka7361 is a fluorine-modified polymer solution, which can effectively reduce surface tension in water-based systems, improve substrate wetting and coating fluidity and leveling, and prevent the formation of Benard vortex .
Product information
Chemical composition: fluorine-modified polymer solution.

The data given on this data page are only typical values, not technical indicators of the product.

Acid value: about 80mgKOH/g
      Density: 0.99g/mL (25°C)
      Appearance: transparent yellowish fluid
      Non-volatile matter (20min, 150°C): 80%
      Solvent: Butanol may occur when the
 storage and transportation
temperature is lower than 0°C Layer or muddy oil, heat to 20°C and mix well.
Special attention
In external coatings, the additives (which will follow the outer layer resin of a) are quickly lost from the coating surface due to the normal atmospheric aging process. Considering the above, the long-term effectiveness of the specific base material system must be evaluated.
Application information Features and advantages of
industrial coatings
:
Anjeka 7361 can improve the wettability and leveling of the substrate with a small amount. The product has excellent compatibility in water-based coatings, can improve leveling, prevent shrinkage, and has the functions of defoaming and gas release at the same time, without affecting the adhesion between layers. Because of the cross-linking of its active groups with the paint film, it can effectively improve the smoothness, solvent resistance, weather resistance and anti-blocking of the paint film.

Application field

The recommended dosage is
0.3%-2%. The
above data is an empirical dosage. The optimal dosage of a needs to be determined through a series of experiments.
Adding method and processing instructions
can be added at any stage of the production process, or can be added later.
Packaging—
25kg inner coated iron drum—
180kg ring plastic drum