Overview of water-based leveling agent Anjeka 7332
Wuhan water-based leveling agent Anjeka 7332 has good wettability to difficult substrates, strongly reduces the surface tension of the coating, and therefore has good anti-cratering properties. Prevent the formation of Bena monomer. Used in water-based coating system/oil-based coating system.
       Product information
Chemical composition: polyether modified polydimethylsiloxane.
The data given on this data page are only typical values, not technical indicators of the product.
       Appearance: transparent liquid
       Solubility: water/oil
       density: 1.04g/cm3 (kg/m3)

Effective substance content: 98 (%)

Storage and transportation When the
temperature is lower than 5 °C, delamination and turbidity may occur. Heat to 20 °C and mix thoroughly. Store in a cool and dry place.
       Special attention
Before large-scale use, a series of experiments should be carried out to confirm whether these additives stabilize the foam. In addition, the recoatability and shrinkage tendency should be evaluated.
APPLICATION GUIDELINES/application information
Industrial coating
       characteristics and advantages:
This additive provides a strong reduction in the surface tension of coatings and printing inks. Therefore, it particularly improves the wettability of the substrate and avoids shrinkage. Increase surface smoothness and gloss. In water-based systems, improved anti-blocking properties. At the same time, it has excellent compatibility and can be used as an anti-cratering additive.
       Application areas
Water-based systems, solvent-based systems, and solvent-free systems.

The recommended dosage is
0.1-0.8%. The dosage of additives (purchased form) is based on the total formula.
The above data is empirical dosage, and the optimal dosage of a needs to be determined through a series of experiments.
      Adding method and processing instructions
can be added at any stage of the production process, or can be added later. In order to facilitate the addition of Anjeka7332, first dilute the auxiliary with a suitable solvent.
     Packaging—
25kg inner coated iron drum—
200kg ring plastic drum