An overview of anti-settling thickening thixotropic agent Anjeka 4310-20X

Wuhan thixotropic agent Anjeka 4310-20X is a polyamide wax pre-dispersed in a solvent, which can provide anti-settling properties and anti-sagging effects of pigments and fillers in coating systems.

product information

Chemical composition: polyamide wax dispersion .

The data given on this data page are only typical values, not technical indicators of the product.

Appearance: slightly yellow soft wax

Specific gravity: 0.88-0.92

Effective substance content: 20%

Solvent: xylene /isopropanol

Storage and transportation

Keep away from heat and fire sources. Store in a cool and ventilated place, and keep the container tight.
The storage environment is 0°C to 40°C (return to about 25°C before use).   

pay attention

In case of dryness, crusting, agglomeration and other phenomena caused by wax slurry sealing, the dry part should be removed to avoid difficulty in dispersion.

Application information

Industrial Coatings

Features and advantages:

1. The thixotropic effect is better than general anti-settling agents, and it has thickening and anti-sagging effects for most solvent-based coatings, especially suitable for high film thickness coatings; 2. Maintaining stable viscosity and preventing pigment settling. Even if it settles slightly, it is easy to stir evenly, and will not deposit and harden at the bottom of the tank; 3. It can help aluminum powder, mica powder, and scales to be positioned neatly and improve their flashing effect; 4. Easy to disperse, without grinding, use a high-speed mixer Disperse uniformly; 5. No heating activation is required, and the suitable temperature range for dispersion (20°C-40°C).

Application field

Solvent-based coatings, solvent-based inks, UV curing, joint sealants.

 Recommended dosage

For anti-settling: 0.5-2%

For anti-sagging: 2-5%

The above data is empirical dosage, and the optimal dosage of a needs to be determined through a series of experiments.

Joining method and processing guidance

Anjeka 4310-20X anti-settling thixotropic agent needs a short time of dispersion to form the desired thixotropic structure. High-speed mixer a is appropriate for the dispersing equipment, and the dispersing condition with a tangent speed of 4 meters/second or more, the time is within 60 minutes, and the temperature is controlled below 40 ℃, especially the temperature is 25 ℃ -35 ℃, and the time is 30-40 minutes a. , This can ensure that Anjeka 4310-20X is completely dispersed and avoid excessive dispersion.

package

— 16 kg iron drum