Overview of solvent-based wetting and leveling agent Anjeka 7306TDS
Anjeka 7306 is a surface additive for room temperature curing plastic systems and solvent-based coating systems containing silicone, which can significantly reduce surface tension. Excellent substrate wetting, anti-cratering and increase surface slip.
product information
Chemical composition: polyether modified polydimethylsiloxane solution.
The data given on this data page are only typical values, not technical indicators of the product.
Density (20 °C): 0.93 g/ml
Non-volatile matter (30 min, 150 °C): 15?%
Solvent: Xylene/ethylene glycol monophenyl ether
Flash point: 25 °C
Storage and transportation
If the temperature is lower than 5 °C, delamination or turbidity may occur. Heat to 20 °C and mix well.
pay attention
Compared with silicone oil, this additive is safer to use. However, the foam stabilization, recoatability and shrinkage tendency in the corresponding system should still be tested before mass use.
Application information
Industrial Coatings
Features and advantages:
The silicone additive significantly reduces the surface tension of the coating system, and can effectively wet substrates that are difficult to wet. Improve the acceptance of dust and paint mist and increase the surface smoothness. The additive reduces the sensitivity of wood and furniture coatings to airflow and improves the orientation of the matting powder.
Application field
The above data is empirical dosage, and the optimal dosage of a needs to be determined through a series of experiments.
Joining method and processing guidance
The additive can be added at any stage in the production process, or it can be added later. In order to facilitate metering, the additive can be pre-diluted.
package
—25kg inner coated iron drum
—180kg ring plastic drum